The 4099U is a microphone system especially designed to address the unique mounting challenges of slim bodied and unusually shaped instruments. It allows for high quality audio capture while the low profile and light weight of the unobtrusive design provides visual elegance along with uncompromised sound quality.The creative design of the unique microphone clip includes a hook-and-loop fastener strap which allows the holder to fit numerous instruments of varying sizes and diameters such as oboe, clarinet, bassoon, recorder and flute. The hook-and-loop fastener band pulls tight to fit the circumference of the instrument, like a wrist watch on your arm. If using the clip on very large diameter instruments, additional hook-and-loop fastener straps can easily be added to extend the clip’s capacity.The 4099U includes a revolutionary new “90 degree” system which provides many more mounting options. By detaching the clip from the gooseneck and re-mounting it turned 90 degrees, the number of mic positions is doubled.The 4099U includes a 3-pin XLR phantom power adapter. The UC4099 Universal Clip is available separately, and can be used with any of the various versions of the 4099 family.
   
Обсудите этот микрофон на нашем форуме!
Технические характеристики
Directional characteristics: SupercardioidPrinciple of operation: Pressure gradientCartridge type: Pre-polarized condenserFrequency range: 20 Hz to 20 kHzFrequency range, ± 2 dB, 20 cm (7.9 in) distance: 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz; second order low-cut filter at 80 Hz with DAD4099Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44.5 dB re. 1 V/PaEquivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 71 dBTotal harmonic distortion (THD): <1 % up to 123 dB SPL peak; <1 % up to 120 dB SPL RMS sineDynamic range: 100 dBMax. SPL, peak before clipping: 142 dBOutput impedance: From MicroDot: 30 to 40 ohm, from DAD4099 or DAD6001: 100 ohmCable drive capability: Up to 300 m (984 ft) with DAD4099 or DAD6001 XLR adapterOutput balance principle: Signal balanced with DAD4099 or DAD6001 XLR adapterCommon Mode Rejection Ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD4099 or DAD6001 XLR adapterPower supply (for full performance): Min. 5 V - max. 50 V through DPA adapter for wireless systems; 48 V phantom power ± 4 V with DAD4099 or DAD6001 XLR adapterCurrent consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD4099 or DAD6001 XLR adapterConnector: MicroDotColor: BlackWeight: 41 g (1.4 oz)Capsule diameter: 5.4 mm (0.2 in)Microphone length: 45 mm (1.8 in)Cable length: 1.8 m (6 ft)Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD4099 or DAD6001 XLR adapter)Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)Relative Humidity (RH): Up to 90%Gooseneck length: 140 mm (5.5 in)
|  |
Положить в корзину!
